| Klamping Accessories |
 |
|
VAK Tape Klamping |
|
The foam tape which is placed around the outside of the vacuum template to create the Vacuum chamber between the vacuum jig and the work piece. The tape is a closed cell neoprene rubber 3/8" x 3/16" with the correct density to work best in a variety of clamping applications. It sticks to the vacuum jig, but not to the work piece. 
|
| Model | Description | Price | |||
|
| |||||
| VT100 | 100 ft. of VAK Tape | $40 | |||
|
| |||||
| VT50 | 50 ft. of VAK Tape | $25 | |||
|
| |||||
| VT25 | 25 ft. of VAK-Tape | $18 | |||
|
| |||||
| VT10 | 10 ft. of VAK-TAPE | $10 | |||
|
| |||||
| Return to top of Page | |||||
|
VAKuum Hose Klamping |
|
VAKuum Hose is a thick walled vinyl tubing. VP2's 4's and PV'2 & PV4's use the 3/8" I.D. Hose, PV6's and all other automatic air powered systems use 1/2 I.D. Hose. |
| Model | Description | Price | |||
|
| |||||
| VH25 | 25' of VAK Hose 3/8" I.D. | $20 | |||
|
| |||||
| VH15 | 15' of VAK Hose 3/8" I.D. | $15 | |||
|
| |||||
| VH252 | 25' of VAK Hose 1/2" I.D. | $25 | |||
|
| |||||
| VH152 | 15' of VAK Hose 1/2" I.D. | $20 | |||
|
| |||||
| Return to top of Page | |||||
|
VAKuum Klamping Jigs Klamping |
|
These VAKuum Jigs are made of 3/4" thick Clear Acrylic which is ideal for clamping because it will not warp or leak like wood or wood products. 
1. Right Angle Clamp- Hold 2 pieces together at a right angle when fastening them. Use 4 jigs and hold a cabinet together. No more awkward mechanical clamps. 2. Straight Edge-Place it anywhere, no mechanical clamps to interfere with cutting tools. Use it on assembled pieces or vertical surfaces. 30" x 3" X 3/4" or 48" x 3" x 3/4" 3. Base Plate-Multi-size general purpose holding for routing, sanding, cutting, etc. 4. Toggle Clamp-Place on any surface, vertical or horizontal, to hold any piece, where it might be normally hard to get a clamp. For example to hold a medallion on the side entertainment center while it is being screwed from the inside. |
| Model | Description | Price | |||
|
| |||||
| SE48 | 48" Straight Edge | $63 | |||
|
| |||||
| SE30 | 30" Straight Edge | $42 | |||
|
| |||||
| RTA | Right Angle Klamp | $75 | |||
|
| |||||
| BP1 | Base Plate(9" x 9") | $32 | |||
|
| |||||
| TG1 | Toggle VAK Clamp | $50 | |||
|
| |||||
| AS4 | Acrylic Slab(4' x 1' x 3/4")(Not Shown in Picture) | $100 | |||
|
| |||||
| KK1 | Includes SE30, BP1, RTA | $138 SAVE $11 |
|||
|
| |||||
| KK2 | Includes SE48, BP1, RTA | $158 SAVE $12 |
|||
|
| |||||
| KK3 | Includes SE30, BP1, RTA and TG1 | $185 SAVE $14 |
|||
|
| |||||
| Return to top of Page | |||||
|
Quick Disconnects Klamping |
|
Quick Disconnects are used to quickly change your vacuum line from one template to another. Made of a light weight, tough plastic unlike, the large heavy metal quick disconnects used with air line. Compressed air quick disconnects are large, heavy and may not hold vacuum as some need pressure to create a seal.  |
| Model | Description | Price | |||
|
| |||||
| QD1 | 1 Female, 5 Males, 1 Tee | $16 | |||
|
| |||||
| QD10 | 1 Female, 10 Males, 2 Tees | $27 | |||
|
| |||||
| QD25 | 2 Females, 25 Males, 2 Tees | $50 | |||
|
| |||||
| QDF | Female Quick Disconnect | $4.50 | |||
|
| |||||
| QDM | Male Quick Disconnect | $2.25 | |||
|
| |||||
| CROSS | Plastic Cross 3/8" | $2 | |||
|
| |||||
| TEE | Plastic Tee | $2 | |||
|
| |||||
| Return to top of Page | |||||
|
Pinch Klamps Klamping |
|
Pinch Clamps are used to shut off one side of a vacuum jig that has 2 separate vacuum areas, like a right angle vacuum jig. |
| Model | Description | Price | |||
|
| |||||
| PK1 | 1 Pinch Klamp 1' hose 1 tee | $7 | |||
|
| |||||
| PK4 | 4 Pinch Klamps, 4' hose, 4 tees | $20 | |||
|
| |||||
| Return to top of Page | |||||
|
Pneumatic Foot Pedal Klamping |
|
Protects electric vacuum pumps from overheating when turned on and off repeatedly when used with vacuum clamping jigs. This foot pedal is used with an electric vacuum pump to clamp and release your work piece. |
| Model | Description | Price | |||
|
| |||||
| PFS | Pneumatic Foot Pedal | $90 | |||
|
| |||||
| Return to top of Page | |||||
|
EK1 Electric Clamping Kit |
|||||
|
|||||
Improve you productivity by turning your electric vacuum system into a hands free clamping system.  Includes: - PFS- Pneumatic Foot Switch - VT100- 100' VAK-Tape - QD1- Template Quick Disconnects - PK1- Pinch Klamp - 10' VAK Hose Special Price- $165 normally $168 | |||||
| Return to top of Page | |||||
|
|||||
