Storage Container and Glue Spreaders Pressing

If you want to reduce your preparation time, a Glue Spreader is the Solution: Save a significant amount of time. Apply an even coat of glue quickly and easily. Lower costs by using less glue, reducing squeeze-out and thus avoiding terrible messes. 1.  51/2" Spreader-Hopper Capacity:1 Qt. Made of sturdy ABS with aluminum doctor roller, brass fittings & rubber handle 2.  7" Spreader- Hopper Capacity: 2 Qts. Made of heavy-duty aluminum, chromated fittings & rubber handle, this spreader comes with a chromated stand for idle-time 3.  Storage Container To avoid daily cleaning & to protect your investment, use a special optional storage container with tightly sealing lid. Use with water for PVA glues, or solvent for contact cements. Works with either 51/2" or 7" Spreaders.

Veneer Cutter/Veneer Taper Pressing

4.  Hand Veneer Taper This taper allows you to match and splice not only long veneer, but also short pieces when constructing composite faces. Easy to use, the gummed paper tape is automatically moistened in the unit by a built in sponge. Changing rolls is also easy and quick. You are guaranteed tight joints as the off center front roller pulls the veneers together. A clean job with no sticky fingers. Includes one 650' roll of tape. 5.  Veneer Cutter Fast smooth cutting without the usual tearing or splintering effects. This light weight professional tool will cut or trim veneers up to 1mm(.04")thick. A must for anyone working with veneer. Includes a blade and guiding fence.

Products	Description	Price
GS5	Glue Spreader with 51/2" Grey Rubber Roller	$129
GS7	Glue Spreader with 7" Grey Rubber Roller and Idle-Time Stand	$239
S5	Storage Container for both GS5 and GS7	$59
VC1	Veneer Cutter with guiding fence and blade	$48
RB10	10 Veneer Cutter Replacement Blades	$19
HVT	Hand Veneer Taper	$195
PT	650' Roll of Brown Paper Veneering Tape	$6
VK1	Incudes: GS5, S5, VC1, RB10 and PT     SAVE $12	$229
VK2	Includes: GS7, S5, VC1, RB10 and PT    SAVE $18	$339

Quality VAKuum Products, Inc. Copyright © 1998